| |
Heat Exchangers - Shell & Tube Exchangers - BCF Standard |
| |
Pre-engineered, fixed-tubesheet in 55 designs available from stock. Up to Four Tubeside passes, covering areas as large as 124 square feet. Corrosion-resistant copper alloy core and rugged cast-iron bonnets. |
| |
Heat Exchangers - Shell & Tube Exchangers - HFF Standard |
| |
Adapted from the BCF model, with the addtion of S.A.E. flange connections. Assembled from stock components with 5", 6", or 8" shell diameters. |
| |
Heat Exchangers - Shell & Tube Exchangers - SSCF Standard |
| |
Pre-engineered with all fluid contact parts of stainless steel. Assembled from stocked components. 1-, 2-, or 4-pass models, with heat transfer surfaces from 1.2 to 165 square feet. |
| |
Heat Exchangers - Shell & Tube Exchangers - SX2000 Standard |
| |
Shell and Tubesheets with Cast-Iron bonnets and Copper Tubes. (Options include copper/nickel or stainless tubes, special lengths, baffle spacing, and nozzles. |
| |
Heat Exchangers - Shell & Tube - B300W |
| |
The B300 Series is of U-Tube Design. Primarily designed for Liquid to Liquid heat transfer. This Design allows for large temperature differentials between the Tubeside and Shellside of the Heat Exchanger. The B300 Series is built and stamped in accordance with
ASME Code-Section VIII, Division I. |
| |
Heat Exchangers - Shell & Tube Exchangers - B300S |
| |
The B300 Series is of U-Tube Design. Primarily designed for Steam to Liquid heat transfer. This Design allows for large temperature differentials between the Tubeside and Shellside of the Heat Exchanger. The B300 Series is built and stamped in accordance with
ASME Code-Section VIII, Division I. |
| |
Plate Type Exchangers - BP Model Sizes |
| |
All Brazed Plate Units (BP) are AISI 316 Stainless Steel with Copper Braze. Design Pressure 435 PSIG. Design Temperature 450 deg F max. ASME Code and Optional Nozzle Sizes are available. |
| |
Plate Type Exchangers - BPL Low Pressure |
| |
All Brazed Plate Units (BP) are AISI 316 Stainless Steel with Copper Braze. Design Pressure 150 PSIG. Design Temperature 250 deg F max. |
| |
Plate Type Exchangers - BPR - Refrigerant Evaporators |
| |
Capacity Rating based on Cooling 2.4 GPM of water per ton of refrigeration from 60 deg F to 50 deg F using R-22 direct expansion (quality = 0.25) with 40 deg F Suction temperature. The pressure drop on the Water side is less than 10 psig. |
| |
Heat Exchangers - Air Cooled Exchangers |
| |
All FanEx heat exchangers have heavy duty direct drive fans, copper headers with blazed joints, and galvanized steel housings. Air/oil models feature exclusive, patented Amaspher turbulation to mix oil for better cooling in less space. Twelve standard sizes, with oil flows from 2 to 180 GPM. Air/Air models are available in ten standard sizes, to cool from 20 to 760 SCFM of compressed air. Air/Water or Glycol models come in eight standard sizes, with water flow rates from 40 to 112 GPM. |
